Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Crown Heights
Crown Heights buildings breathe differently than most of the city, and your ductwork usually shows it. If rooms never heat evenly, if dust streaks out around the registers a day after you wipe them, or if you can hear a neighbor’s TV through your return grille, the ducts are leaking or disconnected somewhere between the air handler and the room. We work Crown Heights regularly, from the brownstone blocks off Eastern Parkway to the elevator buildings near Atlantic Avenue, and we know what old-building ductwork looks like here. Call (833) 508-9915 and we’ll get an estimate scheduled.
Our technicians have up to 13 years of experience, and we bring professional-grade Rotobrush and Nikro equipment rather than portable vacuums. Before any work starts, you get one flat price per system for the repair and sealing, agreed in writing, with before-and-after photos of your own ducts when we’re done.
Why Crown Heights Homeowners Call Air Duct Cleaning Williamsburg for Duct Repair & Sealing
Most duct cleaners run a vacuum through the vents and leave. We inspect, repair, and seal, because a cleaned duct that’s still leaking pulls the same dust back in within weeks. That difference matters in Crown Heights, where ducts are often retrofitted into buildings that were never designed for forced air.
Our local reputation here comes from showing the work rather than describing it. You see the inside of your ducts on camera before and after, and you get photos of the mastic and foil-tape seals we install. Crown Heights customers call us back for the other things we do: dryer vent cleaning, HVAC cleaning, and air quality and sanitizing after the mechanical work is finished.
Response to Crown Heights is quick. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. When a section of ductwork has come apart and the system is blowing attic or basement air into a bedroom, we work to get out the same day where the schedule allows.
Local knowledge is the other half of it. A technician who doesn’t know Crown Heights buildings will seal the first joint they see and move on. We map the run first, because in this neighborhood the run rarely belongs to one apartment alone.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Crown Heights
Duct Sealing
Sealing is the core of what we do in Crown Heights, and it’s where old buildings get tricky. In pre-war blocks, duct runs were often pieced together through former closet and transom spaces and shared between neighboring units, so one apartment’s return can be tied into the next apartment’s supply. Seal the wrong joint and you starve one unit of airflow while pressurizing the other. We map the shared riser before we touch anything, then seal with mastic and foil tape at the joints that actually leak.

Flex Duct Repair
A lot of the flex duct in Crown Heights runs is crushed or collapsed inside former closet and transom chases, bent tighter than any manufacturer intends. A crushed flex run moves almost no air, no matter how strong the blower. We open the chase, pull the damaged section, and replace it with a properly supported run that keeps its full diameter.

Metal Duct Repair
The original trunk lines in Crown Heights brownstones and 1920s elevator buildings are sheet metal, and decades of settling masonry leave them with separated seams and pulled elbows. We reconnect and seal those joints, always confirming which unit each branch actually serves before we close it up. Metal repair is often the difference between one cold room and an evenly heated apartment.

Duct Insulation
Ducts running through unheated basement and chase space in Crown Heights lose heat all winter, which is part of why the front rooms never catch up to the back. We wrap exposed runs and seal the vapor barrier so summer humidity doesn’t condense inside the insulation. It’s a small job with a noticeable effect on both comfort and your energy use.
Air Leak Repair runs through all four of these. A humid subtropical climate with cold damp winters and hot humid summers keeps systems working hard in both seasons, and the mature street trees plus winter road grit from Eastern Parkway and Atlantic Avenue traffic load the return-air intakes with pollen and debris. Leaks pull that material straight into the system.
Trusted Brands We Service in Crown Heights
We work with Rotobrush rotary brush systems and Nikro negative-air vacuums, the equipment remediation and HVAC contractors rely on for source removal without spreading contamination room to room. For air quality upgrades after the repair, we work with Honeywell and Aprilaire filtration products, so a sealed system can actually hold clean air once it’s sealed. We don’t claim to stock parts; we assess what your system needs and quote the work in writing. A local pro licensed and insured as their state requires does the installation. One call covers cleaning, repair, and the filter upgrade, with no separate contractors to coordinate.
Common Duct Repair & Sealing Problems We See in Crown Heights Homes
- Shared runs sealed at the wrong joint. In Crown Heights’s dense pre-war blocks, one apartment’s return can connect to a neighbor’s supply. Seal the wrong end and one unit loses airflow while the other over-pressurizes. The run has to be traced with a camera before any sealant goes on.
- Crushed flex duct in closet and transom chases. Retrofitted ductwork pushed through former closets and transoms often sits at sharp angles no duct should take. It collapses over time and cuts airflow to the rooms it serves.
- Disconnected joints after an oil-to-gas conversion. Many Crown Heights buildings had forced air added during 1970s-80s conversions, and the connections at the air handler and plenum were never properly sealed. Those gaps pull soot-laden basement air straight into the supply and return.
- Streaking registers and rooms that never balance. Dust at the grilles plus uneven heating is the classic leak signature. It usually means a run has separated somewhere behind a wall, or the return is pulling from a space it shouldn’t.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Repair & Sealing in Crown Heights, NY
Here’s what the work typically runs in this market, as an estimate:
- Duct sealing, whole system: roughly $450 to $1,400, depending on how many runs need sealing and how hard they are to reach
- Flex duct repair, per damaged run: about $250 to $600
- Metal duct repair and joint sealing: roughly $300 to $900
- Duct insulation, exposed runs: about $350 to $1,000
- Air leak repair at the air handler or plenum: typically $200 to $500
Access drives a lot of it in Crown Heights. A run behind drywall or in a sealed chase takes more labor than one you can reach from a basement. Shared systems in multi-unit buildings need mapping before work starts, and that inspection shapes the quote. The written estimate is the final price: one flat price per system, agreed before we begin. No per-vent pricing, no teaser coupon that grows once the technician is on site. Estimates are free.
We Also Serve Cities Near Crown Heights
Our duct repair & sealing team covers East Flatbush, Williamsburg, Prospect Heights, and Bedford-Stuyvesant. The building stock in those neighborhoods raises the same problems you’ll see in Crown Heights: retrofitted ductwork, shared runs, and masonry buildings that were never designed for forced air. One team covers the whole area, and the estimate process is the same in each.
Serving Crown Heights, NY – Our Local Coverage Area
We serve Crown Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Crown Heights
Because in many Crown Heights buildings they actually do. Older blocks were retrofitted unit by unit, and installers often tapped into a shared riser rather than building a separate run, so your return may tie into the next apartment’s supply. That’s not a flaw we can ignore: it changes how the system has to be sealed. We camera-map the shared run before touching any joint.
Yes, but the mapping comes first. We identify every branch and confirm which unit it serves, then use Nikro negative-air equipment with HEPA filtration to keep dust out of neighbors’ apartments while we work. Sealing a shared system without that step is how one apartment ends up with all the airflow and the other with none.
It usually is, and often more so than in a purpose-built duct system. The ductwork was fitted into spaces that weren’t designed for it, so joints are looser and runs are shorter and more convoluted. Sealing and reconnecting those runs typically makes a bigger difference here than the same work does in newer construction.
It changes how we plan the visit. On narrow Crown Heights blocks with tight alternate-side parking, equipment access takes longer and the work is scheduled around it. We plan the setup so the job doesn’t get held up by a van that has to be moved mid-repair. Tell us about the parking situation when you book.
Yes, and it’s one of the riskier ones. Shared stacks in Crown Heights apartment buildings collect lint from every unit, and leaks in the stack can push lint into wall cavities where it becomes a fire hazard. Dryer vent cleaning is part of what we do, and sealing the shared stack is often the fix. Call (833) 508-9915 for an estimate; estimates are free.
What Happens When You Call
Here’s how a typical duct repair job in Crown Heights goes. In a pre-war brownstone or 1920s elevator building, a homeowner notices rooms that never heat evenly and dust streaking at the registers. A camera inspection usually turns up disconnected flex runs, crushed elbows behind closet walls, and unsealed joints where retrofitted forced air meets original masonry. The pro maps the shared riser first, establishes negative pressure with HEPA filtration, performs source removal and agitation, then reconnects and seals the runs with mastic and foil tape and verifies airflow at the air handler.
Call (833) 508-9915. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We can’t promise a time slot before we’ve looked at the system, but we’ll tell you honestly what the job involves and what it costs. The estimate is free, the price is set per job in writing, and the photos are yours when we’re done.
Written by the team at Air Duct Cleaning Williamsburg.